It is recommended that you change the element type to a hybrid element; however you can also convert this error message to a warning message by setting the environment variable nonhybrid_incompress to

*Elset, elset=Set-1, instance=Part-1-1 1, 2, 5, 6*Elset, elset=_Surf-1_S4, internal, instance=Part-1-1, generate 2, 8, 2*Surface, type=ELEMENT, name=Surf-1_Surf-1_S4, S4*End Assembly

memory to 5725 d 750 material properties expanding memory to 5752 d 75830672 element data for composite material expanding memory to 5767 d 297834873 gradient

All variables applicable to the current procedure and material type(s) will be written to the output database.

IT IS RECOMMENDED THAT YOU CHANGE THE ELEMENT TYPE TO A HYBRID ELEMENT; HOWEVER YOU CAN ALSO CONVERT THIS ERROR MESSAGE TO A WARNING MESSAGE BY SETTING THE ENVIRONMENT VARIABLE NONHYBRID_INCOMPRESS TO

Resetting coefficient qm=1.0e-6. PART ID 9 with MATERIAL ID 4 and EOS ID 0 This is PART 9 in the order of input.

type the desired sense switch: sw1., sw2., etc. to continue the execution.

for the material for element type s4166117 elements are distorted.

***ERROR: Bad Material definition in element number 1 instance SOIL-1: zero or negative initial dilatational modulus caused by bad material data.

Check the element connectivities for underlying elements 4041 instance part-1-1 and 1548398 instance part-1-1 (sharing the common edge whose end points are nodes 141 instance part-1-1 and 142 instance